The way to Refinish Laminate Cabinets

Many people assume laminate cabinets cannot be refinished, but this is far from the truth! There isn’t any want to switch laminate cabinets because they’re old or outdated. Instead, you possibly can merely refinish them! Immediately brighten, modernize, and alter the look of your kitchen’s laminate cabinetry all within your budget. You will need to overview the proper process for laminate cabinet refinishing with a purpose to achieve the absolute best results. For these uncomfortable with do-it-your self helpful work, there is not any need to worry; you possibly can hire a professional contractor and still stay within price range! Continue reading for a quick guideline to refinishing laminate kitchen cabinets, and who to call for professional common contractor work for kitchen remodeling in your town!

Laminate Kitchen Cabinets

If you’re determined to refinish your kitchen laminate cabinets in your own, then good for you! Take a look at the guide below to study some of the main elements and key points for these particular projects. Be sure to put together by first gathering all the mandatory provides and instruments to get the job done right. These include:

Paint and Paint Primer (Water-Based mostly)

Foam Rollers

Rolling Pans

Painter’s Tape

Sandpaper (240 & 150 Grit Sheets)

Old Bed Sheets or Drop Cloths

Disinfectant Spray

Clean Rags

Microfiber Fabric

Everlasting Marker


For a good more up to date look, you can purchase and set up new, more fashionable-looking cabinet handles. These are available for quite a lot of designs and costs at any hardware or residence store. If any laminate is peeling or cracking, it will must be changed entirely. Do not proceed to refinish peeling or cracked laminate cabinetry. However, if it is only slightly peeling in a single corner or so, you possibly can merely sand the exposed area behind the laminate, after which re-glue it utilizing a water-proof adhesive. Use masking tape to hold it in place while it dries. This works greatest for small areas and corners. After getting amassed all the tools and supplies you need, you’re ready to get started.

Here is how:

First clean all the cabinets. Mud them with the microfiber material to remove solids, and then observe with a thorough wipe down using the disinfectant spray. This provides stronger primer adhesion and ensures a cleaner smoother finish.

Utilizing the screwdriver, remove every cabinet face and its deal with while keeping track of where each goes. Use the permanent marker to label each so you’ll bear in mind the place to switch it later.

Place the cabinet faces on the drop cloths, making positive the perimeters stay exposed and accessible. Be sure the drop cloths cover enough surface area to protect the surrounding surroundings from paint.

Use the painter’s tape to line the inside edges of the cabinet faces to prevent paint drips. Take your time on this step to make sure accuracy.

Use the 240 grit sandpaper sheets to manually sand the cabinet faces. Chances are you’ll select to use a handheld portable sander if you are acquainted with its operation. Just make sure to not over-sand.

After sanding, use your microfiber cloth to wipe away the residual mud and sanding debris. Do this completely and remove as a lot mud as possible.

Using your foam roller, apply a coat of water-based paint primer to every cabinet face. Allow this to dry utterly, usually eight to 12 hours depending on the brand.

Once the primer is utilized and has dried utterly, sand each cabinet face again utilizing the a hundred and fifty grit sandpaper. Remove excess sanding mud with your microfiber fabric afterwards.

Do steps 7 and 8 again.

As soon as both coats of primer are utilized and have dried, it is time to apply your water-based paint of alternative utilizing your second foam roller. Make sure to use v-strokes during application to promote even paint marks and distribution.

Repeat step 10.

Permit the cabinets to dry for at least seventy two hours earlier than reattaching hardware and reassembling them in their rightful place. This ensures that the paint has dried and hardened completely.

Not a DIY Kind of Particular person? No Problem!

You might choose to hire a professional painting contractor instead of tackling this project on our own. If you’re not familiar with handy work, and have never painted before, it would be the wisest choice. And you can still stay within an economical budget while you hire professionals for the job.

If you adored this post and you would certainly like to receive additional details pertaining to Cabinet Refinishing Philadelphia kindly visit the web page.

Leave a Reply

Your email address will not be published. Required fields are marked *

I confirm