business

The right way to Refinish Laminate Cabinets

Many people assume laminate cabinets can’t be refinished, however this is much from the reality! There isn’t any want to switch laminate cabinets because they are old or outdated. Instead, you possibly can merely refinish them! Instantly brighten, modernize, and alter the look of your kitchen’s laminate cabinetry all within your budget. It is very important review the correct process for laminate cabinet refinishing with the intention to achieve the absolute best results. For these uncomfortable with do-it-your self useful work, there isn’t any want to worry; you possibly can hire a professional contractor and nonetheless remain within budget! Continue reading for a quick guideline to refinishing laminate kitchen cabinets, and who to call for professional general contractor work for kitchen remodeling in your town!

Laminate Kitchen Cabinets

In case you are determined to refinish your kitchen laminate cabinets in your own, then good for you! Take a look on the guide below to be taught a few of the major components and key points for these particular projects. Make sure you put together by first gathering all the required provides and instruments to get the job accomplished right. These embrace:

Paint and Paint Primer (Water-Based)

Foam Rollers

Rolling Pans

Painter’s Tape

Sandpaper (240 & 150 Grit Sheets)

Old Bed Sheets or Drop Cloths

Disinfectant Spray

Clean Rags

Microfiber Material

Everlasting Marker

Screwdriver

For an excellent more updated look, you should purchase and install new, more trendy-looking cabinet handles. These are available for quite a lot of designs and costs at any hardware or residence store. If any laminate is peeling or cracking, it will have to be changed entirely. Do not proceed to refinish peeling or cracked laminate cabinetry. However, if it is only slightly peeling in a single nook or so, you’ll be able to simply sand the uncovered area behind the laminate, and then re-glue it utilizing a water-proof adhesive. Use masking tape to hold it in place while it dries. This works best for small areas and corners. After you have gathered all of the instruments and supplies you need, you might be ready to get started.

This is how:

First clean the entire cabinets. Dust them with the microfiber material to remove solids, and then comply with with a thorough wipe down utilizing the disinfectant spray. This provides stronger primer adhesion and ensures a cleaner smoother finish.

Using the screwdriver, remove every cabinet face and its handle while keeping track of the place each one goes. Use the permanent marker to label each so you will bear in mind where to interchange it later.

Place the cabinet faces on the drop cloths, making certain the perimeters stay exposed and accessible. Make certain the drop cloths cover sufficient surface area to protect the surrounding atmosphere from paint.

Use the painter’s tape to line the inside edges of the cabinet faces to forestall paint drips. Take your time on this step to make sure accuracy.

Use the 240 grit sandpaper sheets to manually sand the cabinet faces. Chances are you’ll select to use a handheld portable sander in case you are familiar with its operation. Just make sure to not over-sand.

After sanding, use your microfiber fabric to wipe away the residual mud and sanding debris. Do this thoroughly and remove as a lot mud as possible.

Using your foam roller, apply a coat of water-based mostly paint primer to each cabinet face. Permit this to dry utterly, usually eight to 12 hours relying on the brand.

As soon as the primer is utilized and has dried utterly, sand each cabinet face once more utilizing the 150 grit sandpaper. Remove excess sanding dust with your microfiber fabric afterwards.

Do steps 7 and 8 again.

As soon as both coats of primer are utilized and have dried, it is time to apply your water-based paint of choice using your second foam roller. Be sure you use v-strokes throughout application to promote even paint marks and distribution.

Repeat step 10.

Enable the cabinets to dry for at least seventy two hours before reattaching hardware and reassembling them of their rightful place. This ensures that the paint has dried and hardened completely.

Not a DIY Kind of Person? No Problem!

Chances are you’ll choose to hire a professional painting contractor instead of tackling this project on our own. If you are not acquainted with helpful work, and have never painted earlier than, it could be the wisest choice. And you can still stay within a cost-effective price range whenever you hire professionals for the job.

If you have any concerns concerning exactly where and how to use Cabinet Refinishing Philadelphia, you can contact us at the web-site.

Leave a Reply

Your email address will not be published. Required fields are marked *

I confirm