Methods to Achieve a Easy Cabinet Painted Finish

When trying to a phenomenal finished cabinet painting project, there’s some things that the do it yourself residenceowner needs to take into consideration and properly sanding your cabinets and doors is a must to get right in the beginning. Cabinet painting is a really detailed system. Homeowners that wish to take on these types of projects, might want to take the information in this article to be prepared for what it takes to turn out fantastically completed cabinets.

Painting your kitchen cabinets is not like painting partitions or doors in your home. You have to comply with a system. The primary part of that system is to remove any hardware. Next is to properly clean your cabinets then fill any holes or grains that may show up in your end product. The worst thing that can occur is doing everything right, and not filling holes or grain then you could start all over again.

This article is about achieving a smooth end, and that starts with sanding your cabinets. Relying on the cabinets you’ve got whether or not oak or redwood, you’ll want to pick out the correct sandpaper grit. The 2 different grits that homeowners have to have useful are 150 grit and 220 grit sandpaper.

Going with a more coarse grit than a hundred and fifty, will start to dig into your wood and those scratches will appear once you paint your cabinets and the scratches are really bad, then you’ll need to fill them and start the process over again. Never go beneath 150 grit sandpaper. Some people will suggest a hundred and twenty grit sandpaper, but that’s incorrect and should never be considered to your cabinet painting project.

You’ll start out sanding first with 150 grit sandpaper, because that is what’s going to penetrate the sealer or other paint which can be on your cabinets to present your primer something to bond too. When painting your cabinets, you needn’t take your sanding down to the wood. Sanding down to the wood is only needed if you’re staining your cabinets with a new colour or for a contemporary look.

Most people think that you might want to sand your cabinets down to the wood to paint your cabinets however that is not true. Also, the purpose of sanding your cabinets is to remove the shiny sealer which might be in your cabinets now. The glossy sealer is made to repel or create poor adhesion for grease, oil, filth as well as paint. Make sure after you are done sanding your cabinets that they’re very boring, and free of scratches.

After you might have sanded the first stage of protection out of your cabinets, you are actually ready to remove the dust that’s leftover. If there’s any mud that is not removed, the mud as soon as primed will give it’s own sandpaper feel and your end is not going to be smooth. It’s best to wipe down your cabinets with a damp rag when you think you’ve removed all the sanding dust. Let the cabinets dry for a few minutes and repeat the process of wiping down your cabinets with a damp rag or towel.

Now you might be ready to prime your cabinets. After your primer has dried properly normally four-24 hours relying on the primer you used and the manufactures recommendation. This is while you put away the a hundred and fifty-grit sandpaper, you don’t want it anymore. Once your cabinets are primed, you’ll need to make use of your 220-grit sandpaper or finer. Sand the cabinets smooth because primer usually has a texture of its own. You will lightly sand the primer. You are not attempting to sand the cabinets hard, because you do not want to sand away the primer and should re-prime your cabinets noticed areas.

Repeat the dust extraction process. Use microfiber cloths to remove any dust, after that use damp rags or towels to remove any remaining dust. The following step is to paint your cabinets with the primary coat of premium paint. Let the paint dry and sand your cabinets again between each coat of paint. You wish to apply a minimal of two coats of paint.

For more about Kitchen cabinet refinishing have a look at our site.

Leave a Reply

Your email address will not be published. Required fields are marked *

I confirm